Tell us your material, vessel and measurement goal. RTS will help identify a suitable UWT solution for your application.
Detect material at a selected location using a capacitive probe.
Detect material at a selected location using a capacitive probe.
UWT RFnivo RF 3000 switches detect a change in capacitance around the probe. The installation, product dielectric behaviour and possible buildup need review. The featured RF 3100 is a point-level instrument, distinct from NivoCapa continuous measurement.
Example: Provide a level-limit signal for a powder bin.
Also known as: Capacitive level switches, RF admittance switches, RFnivo RF 3000.
RF 3000 supports calibration to an uncovered probe, with settings and commissioning conditions defined in its manual.
selected active-shield construction is intended to reduce buildup influence, subject to the application.
insertion, product properties and mechanical load determine the arrangement.
flour, sugar, cement and other solids require application review.
dielectric behaviour and buildup matter.
confirm the exact model and process suitability.
UWT explains capacitive point-level detection with RFnivo. Review it alongside the RF 3000 manual’s calibration and installation requirements.
Bulk solid or liquid, vessel dimensions, minimum and maximum level, density or dielectric properties, temperature, buildup, filling pattern, output signal, and hazardous-area requirements.
No. The manual defines calibration to an uncovered probe and optional recalibration behaviour. Follow the selected mode and verify the switch with the actual material and required full/empty logic.
Bulk solid or liquid, vessel dimensions, minimum and maximum level, density or dielectric properties, temperature, buildup, filling pattern, output signal, and hazardous-area requirements.
Confirm the complete quoted equipment, operating conditions and selected options for your application.
Switch at a point
Signal when bulk material reaches a selected point.
Example: Provide a high- or low-level signal in a grain bin.
Also known as: Paddle level switches, bin level switches, Rotonivo RN 3000/6000.
Sense with vibration
Detect whether bulk solids cover a vibrating sensing element.
Example: Detect a low or high level of a suitable granular ingredient.
Also known as: Vibrating fork switches, vibrating level switches, Vibranivo VN 4000.
Measure without contact
Measure a changing level without a probe touching the material.
Example: Monitor a tank or suitable bulk-solids vessel without a mechanical sensing weight.
Also known as: Non-contact radar sensors, NivoRadar NR 7100, continuous radar level.
Measure capacitively
Measure changing liquid level or a suitable interface with a contact probe.
Example: Monitor the level of a suitable process liquid in a vessel.
Also known as: Continuous capacitive level sensors, NivoCapa NC 8000, interface measurement.
Measure with a weight
Measure bulk-solid level with an automatically lowered sensing weight.
Example: Take scheduled level measurements in a bulk storage silo.
Also known as: Plumb-bob level systems, electromechanical level measurement, NivoBob NB 3000.
