Tell us your material, vessel and measurement goal. RTS will help identify a suitable UWT solution for your application.
Measure changing liquid level or a suitable interface with a contact probe.
Measure changing liquid level or a suitable interface with a contact probe.
UWT NivoCapa NC 8000 equipment uses capacitance for continuous level and selected interface applications. Probe construction, liquid properties and the installation determine suitability. This is different from a Capanivo or RFnivo point-level switch.
Example: Monitor the level of a suitable process liquid in a vessel.
Also known as: Continuous capacitive level sensors, NivoCapa NC 8000, interface measurement.
dielectric behaviour and conductivity affect the measurement arrangement.
rod or rope construction and insulation must suit the medium and vessel.
measuring two phases requires a suitable product combination and setup.
chemistry and temperature guide contact construction.
review conductivity, coating and cleaning conditions.
establish the two media and their changing composition.
UWT explains continuous capacitance measurement for liquids and suitable interfaces. Probe and medium selection remain application specific.
Bulk solid or liquid, vessel dimensions, minimum and maximum level, density or dielectric properties, temperature, buildup, filling pattern, output signal, and hazardous-area requirements.
No. A switch reports a condition at a point; a continuous instrument provides a changing measurement over a defined range. Choose the required output before comparing the probe designs.
Bulk solid or liquid, vessel dimensions, minimum and maximum level, density or dielectric properties, temperature, buildup, filling pattern, output signal, and hazardous-area requirements.
Confirm the complete quoted equipment, operating conditions and selected options for your application.
Switch at a point
Signal when bulk material reaches a selected point.
Example: Provide a high- or low-level signal in a grain bin.
Also known as: Paddle level switches, bin level switches, Rotonivo RN 3000/6000.
Sense with vibration
Detect whether bulk solids cover a vibrating sensing element.
Example: Detect a low or high level of a suitable granular ingredient.
Also known as: Vibrating fork switches, vibrating level switches, Vibranivo VN 4000.
Switch capacitively
Detect material at a selected location using a capacitive probe.
Example: Provide a level-limit signal for a powder bin.
Also known as: Capacitive level switches, RF admittance switches, RFnivo RF 3000.
Measure without contact
Measure a changing level without a probe touching the material.
Example: Monitor a tank or suitable bulk-solids vessel without a mechanical sensing weight.
Also known as: Non-contact radar sensors, NivoRadar NR 7100, continuous radar level.
Measure with a weight
Measure bulk-solid level with an automatically lowered sensing weight.
Example: Take scheduled level measurements in a bulk storage silo.
Also known as: Plumb-bob level systems, electromechanical level measurement, NivoBob NB 3000.
