Tell us your material, vessel and measurement goal. RTS will help identify a suitable UWT solution for your application.
Measure a changing level without a probe touching the material.
Measure a changing level without a probe touching the material.
UWT NivoRadar NR 7100 uses 80 GHz FMCW radar for continuous level measurement. The compact sensor is reviewed around the vessel, measuring range, filling pattern and the surface being measured. Obstructions and process conditions remain part of a proper installation review.
Example: Monitor a tank or suitable bulk-solids vessel without a mechanical sensing weight.
Also known as: Non-contact radar sensors, NivoRadar NR 7100, continuous radar level.
the instrument provides a changing level reading rather than only a limit switch.
nozzles, internal structures and filling streams affect mounting.
power, signal integration and configuration must suit the control system.
surface behaviour, foam and vessel geometry need review.
surface angle, filling and signal conditions influence suitability.
confirm the exact range and environmental requirements.
UWT explains free-beam NivoRadar measurement. This is a family principle video; use the NR 7100 technical manual for the featured model’s setup and application limits.
Bulk solid or liquid, vessel dimensions, minimum and maximum level, density or dielectric properties, temperature, buildup, filling pattern, output signal, and hazardous-area requirements.
Do not assume so. Describe buildup, foam, dust, internal structures and filling conditions so signal reliability and mounting can be assessed for the actual application.
Bulk solid or liquid, vessel dimensions, minimum and maximum level, density or dielectric properties, temperature, buildup, filling pattern, output signal, and hazardous-area requirements.
Confirm the complete quoted equipment, operating conditions and selected options for your application.
Switch at a point
Signal when bulk material reaches a selected point.
Example: Provide a high- or low-level signal in a grain bin.
Also known as: Paddle level switches, bin level switches, Rotonivo RN 3000/6000.
Sense with vibration
Detect whether bulk solids cover a vibrating sensing element.
Example: Detect a low or high level of a suitable granular ingredient.
Also known as: Vibrating fork switches, vibrating level switches, Vibranivo VN 4000.
Switch capacitively
Detect material at a selected location using a capacitive probe.
Example: Provide a level-limit signal for a powder bin.
Also known as: Capacitive level switches, RF admittance switches, RFnivo RF 3000.
Measure capacitively
Measure changing liquid level or a suitable interface with a contact probe.
Example: Monitor the level of a suitable process liquid in a vessel.
Also known as: Continuous capacitive level sensors, NivoCapa NC 8000, interface measurement.
Measure with a weight
Measure bulk-solid level with an automatically lowered sensing weight.
Example: Take scheduled level measurements in a bulk storage silo.
Also known as: Plumb-bob level systems, electromechanical level measurement, NivoBob NB 3000.
